Technical Specifications for Steel Tandoors.

1. CONSTRUCTION :
Inside the Stainless Steel cover, a strong St. Steel / MS Iron angle frame (Iron Oxide & Enamel painted) is built to support the Clay Oven / Pot (Clay Tandoor ). The Base is made with 10 gauge MS Sheet & with Fire Bricks over it.

2. EXTERIORS :
Top of the Tandoor is built with 16/18 gauge Stainless Steel & a water container is provided for the convenience of the operator. (Optional)

3. THE SIDES :
They are built with 18/20 gauge stainless steel sheet, well polished & ventilation is provided for escape of hot air. (This may differ for Different modals with different Material like Aluminum/Galvanized Iron Sheet or Stainless Steel Sheet).

4. INSULATION :
As per requirement depending upon the size of the Clay Tandoor / Oven; 6" thick at base & at the top and 4" at the center has been provided to ensure that there is minimum Heat Loss from the sides of the Tandoor which makes it more Fuel Efficient.

Note : WE ARE NOT USING GLASS WOOL / ASH AS INSULATION.

The GLASS WOOL being an inferior & carcinogenic (cancer causing) agent & poses a Health Hazard both to the manufacturer & Potential hazard to the end user. We use only the Best Quality of Industrial Insulation as being used in high temperature Industrial Furnaces.

5. WHEELS: (Optional in Domestic Modals)
Size 4" Castor wheels for easy & smooth mobility; 2 with lock facility.

6. HANDLE : (Optional in Domestic Modals)
A Steel E.R.W. handle to control the direction of the Tandoor.

7. BURNER : (Optional- Only in Gas Tandoor)
Type T-45 / T-60 / T-70 / Round / Pipe with free flow Jet (only where Gas supply is from pipeline & with low pressure) (May differ with the Difference in various modals). Approved by the Bureau of Indian Standards as most Fuel Efficient Burner.

8. NEEDLE CONTROL VALVE: (Optional - Only in Gas Tandoor)
Easy to use Best Quality Brass Needle Control Valves are provided at a convenient position to Increase or Decrease the Flame of the Burner. Approved by the Bureau of Indian Standards.

9. STAINLESS STEEL LID: (Optional in Domestic Modals)
A Steel Lid with insulation is provided to control the heat loss from the top of the Tandoor.

10. WATER CONTAINER: (Optional)
A Stainless Steel water container is provided for the easy cooking of Indian Breads, Nan, Parantha's etc.

11. ASH TRAY: (Optional)
A St. Steel Ash Tray for the removal of Ash after the Burning of Charcoal etc.for Charcoal fired
Tandoors only.

Using your Clay Tandoor without outer Body & Insulation (as it is) with Gas or Charcoal can cause serious injury.

It can break or crack when put up in extreme temperatures.

Clay Oven/Tandoor needs proper installation with good quality insulation and an outer body, a brick wall or metal drum or any other outer casing you may want to use.